Dynatron A24 Cooler suitable for 2U Chassis with AMD Socket AM4 & AM5

Dynatron A24 Cooler with aluminium fins and heatpipes directly contacting CPU suitable for cooling AMD Socket AM4 and AM5 motherboards in a 2U Chassis.

Dynatron 6028 long life two-ball bearing fan draws cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance Shin-Etsu 7762 thermal grease ensures clean and easy installation.

Case Compatibility: Side Blower design suitable for use in a 2U chassis. Tip: angle the A24 to force air out of the rear of the chassis.

Screw Fit: Screws surrounded by compression springs attach to standard motherboard socket plate.

Compatible Boards and CPUs: AMD Socket AM4 and AM5 Motherboards fitted with a processor producing up to 170W CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 1500 RPM (at 0-20% Duty Cycle); 3500 RPM (at 50%); 7000 RPM (at 100%); Airflow: 8.8 CFM (at 0-20%), 20.3 CFM (at 50%), 40.5 CFM (at 100%); Air Pressure: 0.7 mm-H2O (at 0-20%); 3.6 mm-H2O (at 50%); 14.3 mm-H2O (at 100%); Noise level: 16 dBA (at 0-20%), 32.9 dBA (at 50%), 47.5 dbA (at 100%); Power Consumption: 0.6 W (at 0-20%); 2.16 W (at 50%); 7.2 W (at 100%); Weight: 400g; Fan Dimensions: 60 x 60 x 28mm; Overall Dimensions: 108 x 78 x 67 (H) mm.