Jetway FBZ10 Mini Network Appliance with Intel J6412 Quad Core CPU, M.2 2242, Up to 32GB DDR4 and 4x 2.5Gb Intel LAN

Tiny and Fanless Jetway FBZ10 Pico-ITX Form Factor PC / Network Appliance with Intel Celeron J6412 Quad Core processor with AES-NI, 4x Intel i225-V 2.5Gbps LAN, M.2 Type 2242 PCIe/SATA storage slot, HDMI, RJ45 Serial Port, fTPM 2.0 and Wall mounting bracket included. Barebones unit - simply add a stick of DDR4 SODIMM memory up to 32GB and an M.2 Type 2242/2260 PCIe/SATA drive to complete the internals of the FBZ10.

The FBZ10 is powered by a 2.0GHz (2.6GHz Burst) 4 Core 4 Thread J6412 Celeron processor with 10th gen Intel UHD Graphics on a 100mm x 72mm Pico-ITX Form Factor motherboard. Stylish solid aluminium construction with external AC Adapter.

Storage: 1x M.2 Type 2242 SATA/PCIe3 x2 storage slot. PCIe M.2 drives must be B or B+M Key compatible, i.e. 6 pins on the smaller connector, or with 2 notches.

Memory: 1x 260-pin socket supports up to 32GB DDR4 2666/3200MHz SODIMM.

Front Panel: Power switch; HDMI 2.0b port (up to 4096x2160 @ 60Hz); USB 3.2 Gen2 Type-A port; USB 2.0 port; Recessed Reset switch; Optional Antenna Cover (pops out from inside).

Rear Panel: Optional Antenna Cover; 1x RJ45 Serial Port; 4x Intel I225-V 2.5GBps RJ45 Ethernet; Optional Grounding screw; 12V DC-In power socket (2.5/5.5mm jack connects to supplied 40W AC Adapter.

Cooling: The FBZ10 is a fanless device with integrated heatsink fins on the top of the chassis. The FBZ10 can be operated in temperatures of -20C to 60C with appropriate airflow and can be stored in temperatures of -20C to 80C.

Power Supply: Universal 100-240V External 40W AC Adapter with UK power cord connects to 12V power socket.

Accessories: AC Adapter; UK Power Cord (other power cords available); Screw pack; Wall Mounting Kit.

OS Compatibility: 64-bit drivers available for Windows 10 and 11. Modern Linux distributions run very well on the FBZ10. Ideally suited for pfSense usage due to Intel LAN ports and hardware AES-NI support.

Drivers and Manual: Manual; Windows 10: Chipset, Graphics, Audio, LAN, SIO; ME; Windows 11: Chipset, Graphics, Audio, LAN, SIO; ME

WiFi: Wireless support can be added with a Type-E M.2 2230 card, pigtails and antenna, or connect to a Wireless AP over Ethernet. Suitable kits are available in the related items section, or the configure system page.

Build Notes: The M.2 standoff can be unscrewed to move between the 2260 to 2242 positions. To set the FBZ10 to power-up after power loss, change the Chipset / PCH-IO Configuration / System State after Power Failure setting in the BIOS to "Always On".

Measurements: 125 x 39.5 x 109 mm / 4.96 x 1.55 x 4.29in (W x H x D); Volume: 0.538 litres.

*Note: The FBZ10 supports up to 32GB DDR4 SODIMM memory. This is not compatible with DDR, DDR2 or DDR3 SODIMM memory.