picoPSU-150-XT 12V Plug-in DC-DC ATX PSU with Mini-Fit JR (192W AC Adapter Compatible) *5 Year Warranty*
The picoPSU-150-XT plugs directly into a motherboard ATX connector and measures just 53 x 13 x 32 mm - little more than the size of two AA batteries. The picoPSU-150-XT generates up to 150 Watts of power from a 12V DC supply, at over 96% efficiency. An attached cable harness provides:
- 24pin ATX Connector
- SATA Power Connector
- Molex (ATA) HDD Power
- 12V P4 Power
1U Compatible: The picoPSU-150-XT will fit into a 1U Chassis when attached to a motherboard (the picoPSU-160-XT will not).
Compatibility: The picoPSU-150-XT can power all our Mini-ITX boards e.g. Celeron but also earlier Geode, C3, C7, Atom and Fusion processors. Additionally most Mini-ITX boards with Intel and AMD processors up to around 95W TDP can be powered, with a 150W or 192W Adapter. More powerful picoPSUs offer more headroom for additional devices. If you are considering using with a board not on our site, please email us to check compatibility.
Using with Socket CPUs: Modern 65W and 95W TDP processors can draw considerably more than their TDP under certain load conditions. To limit their power envelope to use with the picoPSU-150-XT, switch Turbo Mode off in the BIOS.
12V AC Adapter Required: You will need a 12V AC Adapter to use this picoPSU. Please read their product listings to determine which is most suitable for you. Compatible Universal AC Adapters:
*The 2.5/5.5mm Jack can be replaced with the more robust 4-pin Mini-DIN connector that is supplied with our 150W and 192W AC Adapters. **Adding more SATA drives:** The picoPSU-150-XT has one SATA connector and a Molex connector. To power more SATA drives use the Peripheral Extension Cable or a Molex to SATA or 2x SATA cable. **24pin ATX and P4 Power Connector provided:** The picoPSU-150-XT is ready to use with all Mini-ITX boards with 24pin ATX connectors. **Long Life:** The picoPSU-150-XT is marked for long life production and is guaranteed to have a life cycle of 5 years or more. **Notes:** Not suitable for use with batteries, unstable power sources or voltages other than 12V. **5 Year Warranty*: We are so confident in the build quality of our genuine picoPSUs that from June 1st 2016 we now offer a 5 year warranty when the picoPSU-150-XT is purchased together with one of our AC Adapters (currently 60W - 192W). Offer applies when being used to power appropriate rated components only with our AC Adapters. Please contact us if you are unsure what combination to purchase. Installation Guide
|Form Factor||ATX picoPSU|
|ATA HDD Power||195mm|
|Operating Temperature||-20℃ - 55℃|
|Storage Temperature||-40℃ - 40℃|
|W x L x H||53 x 13 x 32 mm|