picoPSU-90 12V Plug-in DC-DC ATX PSU *5 Year Warranty*
The picoPSU-90 plugs directly into a motherboard ATX connector and measures just 45 x 16 x 32 mm - about the size of two AA batteries. The picoPSU-90 generates up to 90 Watts of power from a 12V DC supply connected by a 2.5mm/5.5mm Jack, at over 96% efficiency. An attached cable harness provides:
- 20pin ATX Connector
- SATA Power Connector
- Molex (ATA) HDD Power
- 12V P4 Power
Compatibility: The picoPSU-90 can power all our Mini-ITX boards with <35W TDP processors e.g. Celeron but also earlier Geode, C3, C7, Atom and Fusion processors. More powerful picoPSUs offer more headroom for additional devices. If you are considering using with a board not on our site, please email us to check compatibility.
12V AC Adapter Required: You will need a 12V AC Adapter to use this picoPSU. Please read their product listings to determine which is most suitable for you. Compatible Universal AC Adapters:
Adding more SATA drives: The picoPSU-90 has one SATA connector and a Molex connector. To power more SATA drives use a Molex to SATA or 2x SATA cable.
P4 Power Connectors: The picoPSU-90 comes with a 4-pin P4 Connector on the cable harness so is ready to use with boards with P4 sockets (check board listing details).
Cable Lengths: (1) DC Input cable is 25cm long (2) 12V P4 Cable is 23cm long (3) Molex HDD Connector is 20cm along cable; SATA connector is additional 10cm. Measurements do not include connectors.
Notes: Not suitable for use with batteries, unstable power sources or voltages other than 12V.
5 Year Warranty*: We are so confident in the build quality of our genuine picoPSUs that from June 1st 2016 we now offer a 5 year warranty when the picoPSU-90 is purchased together with one of our AC Adapters (currently 60W - 192W). Offer applies when being used to power appropriate rated components only with our AC Adapters. Please contact us if you are unsure what combination to purchase.