Fan Duct for Phoenix-ITX / A18 / C64x Chassis

Arriving Early April 2025

This is one of the parts provided with the Infinity System Builders Kit.

Priority for C64x Customers: If we reach a low stock situation with this part we may have to prioritise Infinity C64x System builds and Infinity System Builders Kit orders before individual orders.

If you want to build your own C64x Infinity System this is one of the parts you will need.

This duct connects the Dynatron A18 fan to the rear of the C64x. Fit the thin 40mm fan shield provided with your C64x into the remaining gap as a cover. It is designed only for the Phoenix-ITX board but with modifications could be made to fit another AM4/AM5 motherboard.

These parts are 3D-printed and may have slight imperfections on the surface which will not affect behaviour. To create a tighter seal you can use tape between the duct and the A18.

Or you can print it yourself!

You can download the STL file here (send us a photo of your build if you do)