Jetway JNF9M-2930 Long Life Fanless 1.83GHz Quad Core Celeron Thin-ITX Board with 9-36V DC Input

Long-life board with ultra-low profile form factor (20mm high). Fanless 1.83GHz Intel Quad Core N2930 Bay Trail-M processor and integrated 313MHz - 854MHz Intel HD Graphics. Up to 8GB of system memory supported on 2x 4GB DDR3L SODIMMs. Realtek RTL8111G Gigabit Ethernet and High Definition Realtek ALC662 2.1 Channel HD Audio with 3W Speaker Amplifier. mSATA, PCI Express x1 and Mini PCI-E Slots.

Rear Panel Connectors: 9-36V regulated DC Input, 2x USB 3.0 Ports, DVI-I, RS232 Serial, Gigabit Ethernet, 2x USB 2.0 Ports, 1x 3.5mm Audio.

Board Connectors: 1x 2pin 9-36V alternate power connector (cannot be used at the same time as the external DC input); 1x 4pin Power out (male, cable provided); 2x DDR3L SODIMM Socket; 1x PCI-Express x1; 1x Full Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x Full mSATA (shared with 1x SATA port); 3x RS232 Serial headers (+5V/+12V); 2x USB 2.0 headers on 1x 9pin connectors; 2x USB 3.0 headers on USB 3.0 connector; 1x Parallel; 1x GPIO; 1x 24bit dual channel LVDS header/inverter; 3x Fan Headers; 1x 2pin LAN LED header; 1x 2pin S/PDIF header; 1x 4pin SMBUS header; Front Panel Header; 1x 9-pin Audio; 1x PS/2 Keyboard/Mouse header.

Important! This board has a 9-36V DC Power input and is not designed for use with a standard ATX PSU: The JNF9M-2930 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 2 other SATA devices through an on-board 4pin power output connector. There is an alternate 9-36V input on a 2pin Molex 5566-2 connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we do not recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9M-2930: M350 and M5X.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9M-2930 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

*Note: The JNF9M supports up to 8GB DDR3L memory on 2x 4GB 1.35V DDR3L SODIMMs, available in the 'You may also require' section on the left. This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory.